Dosing Pump PKX FT/A works from the flowmeter

Dosing technologies › Dosing pumps › Dosing pump reagent PKX › Dosing Pump PKX FT/A works from the flowmeter

The dosing pump PKX FT/A works from the pulse flowmeter

• Productivity: up to 10 l/hour.
• Pressure: up to 7 bar.

 Questionnaire
 Catalog
 Operation instructions

Picker from the cob of the PKX FT/A metering pump robot

The dosing pump PKX FT/A works from the pulse flowmeter.

Dosing modes of the pump constant ON-OFF on the timer and proportional to PROP. Productivity is regulated by the potentiometer handle.

Dosage regimens:

- Manual. The constant "ON-OFF" dosing mode on the timer is indicated by the function T=1:(0-60 sec.). For each pulse of the flowmeter, the pump is turned on for a time of 0-60 seconds, the time is set manually in a percentage of 0-100%

Example: Set the potentiometer knob to a distribution of 50% on a scale of "% t" we get a time of 30 sec., That is, one pulse of the flow meter, the pump is turned on for 30 sec. If the next pulse arrives from the flowmeter within the set time, the pump will ignore it.

- Proportional "PROP". The dosing mode is denoted by the function F=1:1. Each operating pulse of the flow meter has one operating pulse of the dosing pump.

The switch of functions "F" and "T" is located on a back cover of the case of the pump.

• Dosing pump operating from a pulse flowmeter.
• Operating modes:
  I - Proportional 1x1: one approved pulse from the flow meter = 1 injection pump.
  II - Dosing in the time interval 1x (0-60 sec): one approved pulse from the flow meter = dosing in the range of 0-60 sec.
• Level sensor support (sensor not included)

PERFORMANCE SCHEDULES

The pump case is made of anti-acid plastic. The head is equipped with a manual air bleed valve.

Pump control panel with a simple analog interface - three LED indicators (LED) and a potentiometer handle. The sticker of the panel is covered with a polyester film resistant to UV rays and moisture.

Delivery KIT

Each PKX pump is included as standard:

1. Dosing pump (1 pcs).
2. Universal mounting bracket.
3. Flexible intake hose made of PVC (4 meters).
4. Reset hose (2 meters).
5. Intake valve (1 pcs).
6. The output valve (1 pcs).
7. Passport-instruction (1 pcs).

Example of pump installation PKX PKX FT/A

The dosing pump PKX FT/A works from the pulse flowmeter